HIRSCHMANN RS2-4TX/1FX EEC Industrial Ethernet Rail Switch 2
HIRSCHMANN RS2-4TX/1FX EEC Industrial Ethernet Rail Switch 2
The Rail Switches – RS2-3TX/2FX EEC– RS2-3TX/2FX-SM EEC– RS2-4TX/1FX EEC – RS2-4TX/1FX-ST EEC– RS2-4TX/1FX-SM EEC– RS2-4TX EEC
in short RS2-xTX/xFX EEC, are switches
especially designed for use in industrial
environments. They support Ethernet 10
MBit/s and Fast Ethernet 100 MBit/s.
The Rail Switch modules support switched
Ethernet networks in accordance with IEEE
standard 802.3 using copper and fiber optic
technology. The switch modules are plug
ged onto the standard DIN rail.
The RS2-3TX/2FX… modules have three
10/100 MBit/s twisted pair ports
(10/100BASE-TX, RJ45 connectors) and two
100 MBit/s fiber optic ports (100BASE-FX,
Duplex SC connector).
It is possible to connect up to three DTEs or
other TP/TX network segments to the TP/TX
ports using twisted pair cabling. Two further
DTEs or optical network components can be
connected to the fiber ports.
The RS2-4TX/1FX… modules have four
10/100 MBit/s twisted pair ports
(10/100BASE-TX, RJ45 connectors) and one
100 MBit/s fiber optic port (100BASE-FX,
Duplex SC connector or ST connector on
R2-4TX/1FX-ST EEC).
The RS2-4TX EEC module has four
10/100 MBit/s twisted pair ports
(10/100BASE-TX, RJ45 connectors).
It is possible to connect up to four DTEs or
other TP/TX network segments to the TP/TX
ports using twisted pair cabling. One further
DTE or optical network component can be
connected to the fiber port (with RS2
4TX/1FX…).
The TP ports support auto negotiation,
autopolarity and autocrossing.
The fiber optic ports support full duplex
(FDX).
The performance features described here
are binding only if they have been expressly
guaranteed in the contract. We have
checked that the contents of the technical
publication agree with the hardware and
software described. However, it is not possi
ble to rule out deviations completely, so we
are unable to guarantee complete agree
ment. However, the details in the technical
publication are checked regularly. Any cor
rections which prove necessary are contai
ned in subsequent editions. We are grateful
for suggestions for improvement.
We reserve the right to make technical
modifications.
RS2-4TX/1FX
Permission is not given for the circulation
or reproduction of this document, its use or
the passing on of its contents unless gran
ted expressly. Contravention renders the
perpetrator liable for compensation for
damages. All rights reserved, in particular
in the case of patent grant or registration of
a utility or design.
Copyright
© Hirschmann
Automation and Control GmbH 2015
All Rights Reserve
Note
We would point out that the content of
these operating instructions is not part of,
nor is it intended to amend an earlier or exi
sting agreement, permit or legal relation
ship. All obligations on Hirschmann arise
from the respective purchasing agreement
which also contains the full warranty condi
tions which have sole applicability. These
contractual warranty conditions are neither
extended nor restricted by comments in
these operating instructions.
We would furthermore point out that for
reasons of simplicity, these operating
instructions cannot describe every
conceivable problem associated with the
use of this equipment. Should you require
further information or should particular
problems occur which are not treated in
sufficient detail in the operating instruc
tions, you can request the necessary infor
mation from your local Hirschmann sales
partner or directly from the Hirschmann
office (address: refer to chapter entitled
„Notes on CE identification“)