ROLLS-ROYCE MPC-300 STARTER CONTROL UNIT A7029099

ROLLS-ROYCE MPC-300 STARTER CONTROL UNIT A7029099

The Alarm Page is common for all thrusters and includes the following: – Listing of all alarms relevant for the control system (alarm buzzer in control lever base)

– Acknowledge of all alarms (alarm buzzer may also be silenced from button in control lever base) – Acknowledged alarms remains until error condition disappears.

Viewcon (1 pc.)

The unit is designed for bulkhead mounting and should be located on the bridge. Cable access is through

a cover plate that can be removed for fitting of cable glands. Location of the unit should be selected with

due to emphasis on service access.

The Viewcon cabinet includes a switch for routing of Ethernet signals to the bridge control panels.

Control lever functions

Potentiometers and electronics for I/Os and control, both for normal and backup system, are included

inside the lever. The display in the base shows set command (pitch and direction) from the lever.

Description of equipment for main thruster units (diesel-electric

systems).

Electronic unit (one per unit)

The electronic unit is designed for bulkhead mounting and should be mounted in the instrument room or

nearby the bridge. (Note! Electronic unit must not under any circumstances be removed from the

electronic cabinet and mounted into any console separately). Cable access is through a coverplate

that can be removed for fitting of cable glands. Location of the unit should be selected due emphasis on

service access.

The electronic unit contains the following: – Power supply – Application CPUs (Main and backup) including flash memory – CAN fieldbus – Ethernet communication with control panels

– I/O cards (DI, DO, AI, AO, serial line interfaces) – Circuitry monitoring w/alarm output – Indication circuitry – Cable termination

Power Supply requirement:

Main supply

Back-up supply

Power consumption:

: 230 VAC (+/- 15%) 50/60 Hz

: 24 VDC (+20% – 17%) (Battery back-up)

: Typical 100 – 200 watt

The Remote Control System is designed to accomplish prevailing rules of DNV, ABS, LRS, BV, GL and

RINA.

Distributed IO cabinet (one per unit)

The unit is designed for bulkhead mounting and should be located in the thruster room. Cable access is

through a cover plate that can be removed for fitting of cable glands. Location of the unit should be

selected with due to emphasis on service access.

The IO cabinet contains the following: – I/O to/from external connections. – Power supply – CAN field bus – Cable termination – Local indicator/Control panel

Lub pump control unit (one per main thruster)

The unit selects duty and stand-by pump and is designed for bulkhead mounting and should be located

close to the lub. pumps. Cable access is through cable glands. Location of the unit should be selected

with due to emphasis on service access.

Kollmorgen BJRL-20012-110001 Servo Drive

Kollmorgen Danaher SERVOSTAR 306 S30366 1-NA, 110-230V 50/60 Hz 6A 2.4kVA

Kollmorgen LE10665B SynqNet CD PRD-B065E00A-10 SERVOSTAR CD Servo Drive

KOLLMORGEN SE10200-000000 ServoStar Servo Drive

KOLLMORGEN / 00D09D09001-2-023. 00M121A023 / DC MOTOR, ENCODER

Kollmorgen Servo Motor AKM62K-ANCNEM-00 4500Rpm 3.35kW Ics 8.88

Kollmorgen Servostar CD CR03250

Servo Star SC KOLLMORGEN SC1E06260 PRD-SC30030z-41

KOLLMORGEN Servotronix VRDM Amplifier PRD-0051AMPF-Y0 50045707

Kollmorgen Seidel 6SM37L-4000 1.5Nm 1.5A 0.5kW

Kollmorgen Seidel 4KS M150/15 SERVO DRIVE

Kollmorgen AKM44S-BSMN1-02 PM SERVO MOTOR

Kollmorgen AKM52K-CC5NR-01 Servo Motor 1.96kw 6000rpm 8.6nm 640v-dc

Kollmorgen S60600 Servostar 600 Model 606 Servo Controller 3×230-480V 4kva 6A

KOLLMORGEN / K42HRFG-LEK-M2-00 / POWERPAC, 1.8′ STEP MOTOR, 507W

KOLLMORGEN DANAHER S200 SERVO 120/240V 1/3 PHASE S20360-DLS REV.3

Kollmorgen Servostar 403A-P (S403BA-PB) Servo Drive

KOLLMORGEN PC833-001-T SERVO DRIVE PC800 PC833001T

Kollmorgen AKD-P00607-NBEC-0000 AKD Series Servo Drive

KOLLMORGEN AKM42E-ACCNC-00 (Servo Motor)

Kollmorgen AKM11E-ANC22-00 Servo Motor

Kollmorgen AKD-P00306-NBAN-0000 AC Servo Drive #214372-Q5

KOLLMORGEN AKM52E-AND2CA00 AC Servo Motor

Kollmorgen AKM22E-ANM2R-00 Servomotor Motor 8000 RPM Danaher

KOLLMORGEN (AKM series) 袟肖 PM servo motor AKM53H-ANCNAA00

Kollmorgen AKM22H-ANBNAD01 Servo Motor 160 VDC 8000 RPM

Kollmorgen MMC-SD-2.30-230-D M.3000.0913 Smart Drive

Kollmorgen Servotronix, PRD-0036000I-15. PRD-0036100A-11. PRD-00016600E-15