BECKHOFF C3620-0000 INDUSTRIAL COMPUTER (MOTORSHELVES)
BECKHOFF C3620-0000 INDUSTRIAL COMPUTER (MOTORSHELVES)
Product Description
Appropriate Use
The C3620 and C3640 Industrial PCs are designed for mounting in control
cabinets in machine and plant engineering applications.
Structure of the C3620O
pening the housing
3½“ hard disk
After loosening the two screws (see arrows) the front of the PC with TFT
display can be opened, thus providing access to the drive (optional),
3½“ hard disk, processor, memory and plug-in cards.
An ATX motherboard with seven slots for plug-in cards is located behind
the removable card holder and the swivel-mounted power supply unit.
The connections of the Industrial PC to the outside are located on top of
the housing.
After loosening the two screws (see arrows) the front of the PC with TFT
display can be opened, thus providing access to the drive (optional),
3½“ hard disk, processor, memory and plug-in cards.
An ATX motherboard with seven slots for plug-in cards is located behind
the removable card holder and the swivel-mounted power supply unit.
The connections of the Industrial PC to the outside are located on top of
the housing.
Optional the Industrial PC is fitted with a CD/ DVD-drive.
The drive is located at the rear side of the PC.
PS/2
USB1 – USB4
LAN1. LAN2
DVI out
RS 232
COM1 – COM2
DisplayPort
Sound
Type plate
C3620. C3640
PS/2 connections
The upper PS/2 connector (X104) allows a PS/2 mouse to be used, while a
PC keyboard can be connected to the lower PS/2 connector (X103).
USB interfaces
The four USB interfaces (X108 – X111) are used to connect
peripheral devices with USB connections:
▪ Devices with Intel® 4th generation processors
(C3620/ C3640-0060) are equipped with 2 USB2.0 (X110.
X111) and 2 USB3.0 (X108. X109) interfaces.
▪ Devices from Intel® 6th and 7th generation processors
(C3620/ C3640-0070) are equipped with 4 USB3.0
interfaces.
Network connection
The RJ-45 connectors (X112. X113) allow the PC to be connected to a
10/100/1000BASE-T Local Area Network (LAN).
DVI-D (Digital Visual Interface)
The DVI connectors (X114. X115) are used for transferring the video
signal. DVI-D standard is supported.
Serial interfaces
The basic version of the Industrial PC has one serial interface, COM1
(X116), using the type RS 232. which is brought to a 9 pin SUB-D plug
connector.
DisplayPort
The DisplayPort (X117) is used for transferring the video signal.
Sound-On-Board
The Industrial PC has an on-board-interface with the following connectors:
Line In (X122), Line Out (X121) and Microphone jack (X120).
Additional plug-in cards (optional)
There is a type plate on the top of the Industrial PC which provides
information about the hardware configuration of the Industrial PC at the
time it was supplied.