Beckhoff AX8620-0000 Power Supply Module

Beckhoff AX8620-0000 Power Supply Module

AX8620 | Power supply module

A power supply module generates the DC link voltage (DC) for the power supply of the axis modules and the option modules from the mains voltage.

It already contains a mains filter, for which the drive is tested and certified in accordance with EN 61800-3 for Category C3 use.

Any regenerative energy produced, e.g. through strong braking of the motors,

can be converted into heat either via the internal braking resistor or via the combination of built-in brake chopper and external braking resistor.

Alternatively, the energy can be buffered in the AX8810 capacitor module.

AX8000 power supply modules can be used on 3-phase low-voltage mains supplies (3-phase mains supplies 200…480 V AC, 50/60 Hz).

A separate 24 V DC power supply is required in each case.

Technical data    AX8620-0000-0000

Function    power supply module

Rated supply voltage    1 x 100…240 V AC

3 x 200…480 V AC

DC link voltage    max. 848 V DC

DC link output current    5/7 A DC (at single-phase feeding), 20 A DC

System bus    EtherCAT

Drive profile    CiA402 according to IEC 61800-7-201 (CoE)

Ambient temperature (operation)    0…40°C, up to 55°C with power reduction (see documentation)

Approvals/markings    CE, cULus

Housing data    AX862x

Protection rating    IP20

Width    60 mm

Dimensions    AX8620-0000-0000

Height without connectors    230 mm

Depth without connectors    192 mm

Width    60 mm

AX8620-0000

​