OMRON R88M-H10030-B plc
OMRON R88M-H10030-B plc
The Setup Tool port is on the top of the Temperature Controller.
It is used to connect the Temperature Controller to the computer to use the Setup Tool.
The E58-CIFQ2 USB-Serial Conversion Cable is required to make the connection.
Refer to the instructions that are provided with the USB-Serial Conversion Cable for the connection procedure.
Note:Do not leave the USB-Serial Conversion Cable connected when you use the Temperature Controller.
Recommended panel thickness is 1 to 5 mm.
•Group mounting is not possible in the vertical direction. (Maintain
the specified mounting space between Controllers.)
•To mount the Controller so that it is waterproof, insert the water
proof packing onto the Controller.
•When two or more Controllers are mounted, make sure that the
surrounding temperature does not exceed the allowable operating
temperature specified in the specifications.
•Use a control panel thickness of 1 to 3 mm if the Y92A-48N and a
USB-Serial Conversion Cable are used together
The Setup Tool port is on the top of the Temperature Controller.
It is used to connect the Temperature Controller to the computer to use the Setup Tool.
The E58-CIFQ2 USB-Serial Conversion Cable is required to make the connection.
Refer to the instructions that are provided with the USB-Serial Conversion Cable for the connection procedure.
Note:Do not leave the USB-Serial Conversion Cable connected when you use the Temperature Controller.
Recommended panel thickness is 1 to 5 mm.
•Group mounting is not possible in the vertical direction. (Maintain
the specified mounting space between Controllers.)
•When two or more Controllers are mounted, make sure that the
surrounding temperature does not exceed the allowable operating
temperature specified in the specifications.
•Use a control panel thickness of 1 to 3 mm if the Y92A-48N and a
USB-Serial Conversion Cable are used together
| IS200EACFG2A GE Exciter AC Feedback Board |
| IS200EACFG1A GE Exciter AC Feedback Board |
| IS200DSPXH1C GE Digital Signal Processor Controller |
| IS200DSPXH1B GE Digital Signal Processor Board (DSPX) |
| IS200DSPXH1A GE digital signal processor control board |
| DS200VPBLG2A GE VME Backplane Board |
| DS200VPBLG1A GE VME Backplane Board |
| DS200FCGDH1B GE Mark V Gate Distribution and Status Card FCGD |
| DS200DSPCH1A GE Digital Signal Processor Control Board |
| DS200DDTBG2A GE LCI Auxiliary I/O Terminal Board |
| DS200DDTBG1A GE LCI Auxiliary I/O Terminal Board |
| DS200ADMAH1A GE Analog-to-Digital Module |
| IS215UCVEH2A GE dual-sided control designed for the LS2100 Series |
| IS215ACLEH2A GE Application Control Layer Module |
| IS215ACLEH1C GE Application Control Layer Module |
| IS200EXTBG4A GE Input/Output Exciter Terminal Board |
| IS200EXTBG3A GE Input/Output Exciter Terminal Board |
| IS200EXTBG2A GE Input/Output Exciter Terminal Board |
| IS200EXTBG1A GE Exciter Terminal Board |
| IS200EXHSG4A GE static exciter terminal board |