SST 5136-DNP-PCI High-performance DeviceNet interface card
SST 5136-DNP-PCI is a high-performance DeviceNet interface card designed to provide a direct, high-speed connection between a PCI-bus computer and a DeviceNet network.
Developed by SST (now part of Molex), this card is engineered to act as a powerful co-processor, handling all DeviceNet protocol management on-board to ensure that the host PC’s resources remain focused on high-level application tasks.
This card is a staple in industrial automation, used extensively for connecting PCs to sensors, actuators, and motor starters in a deterministic, real-time environment.
Technical Parameter Table
| Parameter | Specification |
| Model Number | 5136-DNP-PCI |
| Processor | 32-bit RISC Co-processor |
| Bus Interface | Universal PCI (3.3V / 5V) |
| Memory | 512 KB Shared RAM |
| Network Protocol | DeviceNet (Master, Slave, or Peer-to-Peer) |
| Baud Rates | 125k, 250k, 500k (Auto-baud supported) |
| Isolation | 500V Network Isolation |
| Connector | 5-pin Open-style DeviceNet Connector |
| Diagnostic LEDs | 2 LEDs (Module Status, Network Status) |
| Operating Temp | 0°C to +60°C |
| Compliance | ODVA Conformance Tested |
Related Models
The 5136-DNP series is available across multiple bus architectures to suit different hardware platforms:
5136-DNP-VME: For VMEbus-based industrial computers.
5136-DNP-ISA: Legacy version for older ISA-bus PC architectures.
5136-DNP-PC104: Compact version for embedded PC/104 stacks.
SST-DN4-104: Next-generation high-speed DeviceNet interface.
Application Cases
5136-DNP-PCI
PC-Based Control: Using an industrial PC as a soft-PLC to control a factory line of DeviceNet-enabled I/O.
HMI/SCADA Systems: Providing real-time data visualization from a DeviceNet network to a Windows-based monitoring station.
Device Configuration: Serving as a gateway for engineering tools to configure and calibrate smart sensors and motor drives.
Automotive Assembly: Managing high-speed data exchange between robotic controllers and end-of-arm tooling via DeviceNet.
Product Advantages and Features
High-Speed Co-processing: The onboard RISC CPU manages all CAN-based timing and protocol overhead, ensuring the PC never misses a message.
Universal PCI Support: Compatible with both older 5V and newer 3.3V PCI slots, ensuring long-term hardware compatibility.
Plug-and-Play Setup: No manual jumpers for memory or IRQ settings; everything is managed via the PCI BIOS.
Simultaneous Operation: Capable of operating as a Master and a Slave on the same network at the same time.
Shared RAM Architecture: Provides the fastest possible data transfer between the network and the host application via a 512 KB memory window.
Installation and Maintenance
| REXROTH | 0608820069 |
| REXROTH | 0608820103 |
| REXROTH | 0608830174 |
| REXROTH | 0608830222 |
| REXROTH | CSB01.1N-AN-ENS-NNN-NN-S-NN-FW |
| Rexroth | DKC02.3-200-7-FW |
| REXROTH | DKC03.3-040-7-FW |
| REXROTH | HDS03.2-W075N-HS12-01-FW |
| REXROTH | MDD112D-N030-N2M-130GA0 |
| REXROTH | PIC-6115 |
| REXROTH | PSM01.1-FW |
| REXROTH | RAC 2.2-200-460-A00-W1 |
| REXROTH | SE110 0608830109 |
| REXROTH | SE200 0608830123 |
Installation
Hardware: Insert the card into any available PCI slot. Ensure the computer is powered down and static-protected.
Drivers: Install the SST DeviceNet console and drivers (typically Windows or VXWorks compatible).
Wiring: Use standard DeviceNet cabling. Note that the card draws its network power (V+) from the DeviceNet trunk line to power the transceiver.
Maintenance
LED Status: * Module LED: Solid Green indicates the card is initialized; Flashing Red indicates a hardware fault.
Network LED: Green indicates a stable connection; Red indicates a bus-off condition or duplicate MAC ID.
Firmware: The card supports field-flashable firmware updates via the SST utility without removing it from the PC.
Unique Product Description
The SST 5136-DNP-PCI is the industry-standard “workhorse” for DeviceNet-to-PC connectivity.
Its “Intelligent Architecture” allows it to process high-priority I/O data in the background, making it far superior to basic CAN cards that rely on the PC’s CPU.
For facilities looking to maintain or expand their DeviceNet infrastructure, the 5136-DNP-PCI offers a robust
low-latency bridge that has been proven over decades of 24/7 industrial operation.