Woodward IP30. TB Input/Output 8200-507

IP30. TB Input/Output  8200-507

Applications

The Woodward DVP is

the state-of-the-art

driver for electric

actuation. It features a

rugged and compact

design. The DVP is

designed for use with

various Woodward

valves and actuators. It

provides positioning

based on a demand signal from the control system. Multiple input type configurations

allow the DVP to be used with many different turbine controllers. The driver supports

redundant installations.

Description

The DVP is designed to control valves and actuators with either limited angle torque

(LAT) or brushless DC (BLDC) motor types. The driver positions based on resolver

feedback located on the valve or actuator. The DVP uses the latest in Woodward

control architecture, the robust controller to provide high-speed precise valve control.

The DVP is designed for plug-and-play installations on many valve types. Woodward

has integrated smart technology into the new generation of valves and actuators

called an ID (identification) module. Upon connection to a valve or actuator equipped

with an ID module, the DVP automatically reads critical valve-specific information to

set up the driver. After this auto-detection and customer configuration, the DVP is

ready for use. Both pre-manufactured connectorized cables and terminal connection

models are available.

The DVP is available in multiple configurations:

• Ingress Protected IP30 or IP66 models available

• Connector or terminal block outputs; conduit option available on IP66

• 125 Vdc or 24 Vdc power input options available

• EGD (Ethernet), CANopen, Analog (4–20 mA or 0–5 Vdc), PWM configurable

input options

Electrical Specifications

Power Supply Input: 125 Vdc +20%, –28%

24 Vdc +33%, –25%

(DVP

Current Draw: See Valve or Actuator manual for current draw information

Package Heat Dissipation: With Ethernet Option: 40 W nominal, 70 W @ maximum heat-load

Without Ethernet Option: 40 W nominal, 63 W @ maximum heat-load

The maximum heat-load occurs when the associated fuel valve is being

positioned near the maximum stop of the valve.

Mechanical Specifications

Dimensions: IP30 Model – 279 x 272 x 145 mm (11.0 x 10.7 x 5.7 inches)

IP66 Model – 483 x 311 x 111 mm (19.0 x 12.24 x 4.38 inches)

Weight: IP30 Model – 7.9 kg (17.5 lb)

IP66 Model – 6.95 kg (15.32 lb)

Environmental Specifications

Ambient Operating Temperature: –40 to +55 °C (–40 to +131 °F) with Ethernet module

–40 to +70 °C (–40 to +158 °F) without Ethernet module

Storage Temperature: –40 to +105 °C (–40 to +221 °F)

Humidity: 0 to 100% non-condensing

Mechanical Vibration: Woodward Specification RV5 (0.04 G²/Hz, 10–500 Hz, 2 hours/axis, 1.04 Grms)

Mechanical Shock: Woodward Specification MS2 (30 G, 11 ms Half Sine Pulse)

EMI/RFI Specification: EN61000-6-2: Immunity for Industrial Environments

EN61000-6-4: Emissions for Industrial Environments

Woodward-imposed requirements: Conducted Low Frequency Immunity,

50 Hz – 10 kHz

Impact Protection: The IP66 DVP is suitable for areas where there is a low risk of mechanical

impact (4J per IEC 60079-0 cl. 26.4.2); external connectors must be

mechanically protected from impact.

Environmental Protection: IP30 DVP: IP30 per IEC 60529. A suitable cabinet must be selected for Zone 2

hazardous locations.

IP66 DVP: IP66 per IEC 60529 and IEC 60079 series for Zone 2 hazardous

locations.

Regulatory Compliance

These listings and certifications are limited only to units with the appropriate marking. See Product Manual 26329 for

more information and Special Conditions of Safe Use.

European Compliance for CE Marking:

EMC Directive: 2014/30/EU

ATEX Directive: 2014/34/EU, II 3 G Ex nA IIC T4 Gc (some models T3)

Other European Compliance (not qualified for CE marking):

RoHS Directive: Excluded from the scope of 2011/65/EU for Large Scale Fixed Installations

North American Compliance:

CSA: Certified for use in USA and Canada. Class I, Div. 2 Groups A, B, C, and D T4

(some models T3)

International Compliance:

IECEx: Zone 2. Ex nA IIC T4 Gc (some models T3)

EAC (Russia): 2Ex nA IIC T4 Gc

Marine Compliance (24V DVP, IP66. 2-board):

LR: Lloyds Type Approval Certificate

DNV-GL: Type Approval Certificate

24VDC DVP Driver Classic

IP30. TB Input/Output

8200-507

IP30. TB Input, Circular Connector Output

8200-510

IP66. Conduit Input, Circular Connector Output

8200-513

IP66. Conduit Input/Output

8200-508