YOKOGAWA V0/E1/TCAM/L08 Input/Output Module Card
1. Introduction
YOKOGAWA V0/E1/TCAM/L08 is an industrial control or I/O module card associated with Yokogawa‘s automation and distributed control system (DCS) platforms, particularly the CENTUM VP/VE series.
It’s designed to be part of PLC/DCS infrastructure for executing control logic and communicating within safety-critical automation systems in industrial environments.
2. Technical Parameter Table (Typical/Reported)
Note: Precise official Yokogawa datasheet specs are not publicly accessible via standard search, and third-party reseller listings are often approximate.
The following is compiled from available sources and typical module characteristics:
| Parameter | Specification (Typical) |
|---|---|
| Model | V0/E1/TCAM/L08 |
| Type | Control/I/O module for CENTUM VP/VE systems |
| Function | Safety logic storage & execution |
| Applicable System | CENTUM VP/VE Safety PLC / DCS |
| Operating Voltage | ~24 VDC (industry norm for DCS modules; reseller spec varies) |
| Power Consumption | Low (module-level; often < 10 W) |
| Data Refresh / Processing | Module-specific logic timing |
| Operating Temperature | Industrial range (approx -20 °C to +60 °C, typical) |
| Humidity | 5 %–95 % (non-condensing) |
| Protection Grade | IP20 (module board level typical) |
| Communication | Integration with Yokogawa bus (internal DCS backplane) |
3. Related Models (Same Family / Usage)
Typical modules in Yokogawa DCS/PLC ecosystems include:
CPU & I/O Control Modules:
CP345. CP451 CPU modules
SCP451-11 CPU module
PW4xx power supply modules
F3-series input/output boards
Other system/cabinet modules:
Analog/digital interface cards
Communication bridge modules
Redundancy and safety modules
Expansion I/O cards
These related modules typically reside in the same hardware ecosystem (CENTUM VP/VE, CS3000. etc.).
| ADVANTEST | BGR-022365 |
| AEG | 41-94384 |
| AGILENT | 5086-7906 |
| AGILENT | E1413C |
| Agilent | HP 5517B |
| AIRTAC | ACQS32X20 |
| AJAX | U-02-1743-05 MK-A |
| AJINEXTEK | AMW-MC12-DB96P |
| Alcatel-Lucent | OS9-GNI-U24E |
| Alcatel-Lucent | SFM2-200G |
| ALLEN BRADLEY | MOX12-P3509 |
| ALLEN-BRADLEY | 1746-HSCE |
| ALLIED TELESIS | AT-210T |
| ALLIED TELESIS | AT-2712FX/MT-SB-901 990-004100-901 |
| ALPHA | SP060S-MF2-20-1C1-2S |
4. Application Cases
This type of Yokogawa module is used in industrial automation and process control where reliability and integration into large DCS systems are required.
Common application scenarios include:
Petrochemical & Refinery Plants – logic execution for safety interlocks and process control.
Power Generation & Distribution – automated protection and control routines.
Steel & Metal Production – ensuring process steps are sequenced and monitored.
Chemical Processing – controlling reactors, heat exchangers, and safety states.
Large Manufacturing Lines – sequence automation and integration with MES/DCS reporting.
Modules like these are often part of large control racks alongside other CPU, power, and I/O cards.
5. Product Advantages and Features
While specific Yokogawa documentation isn’t easily found via generic search, modules in this category typically offer:
✔ Reliability & Industrial Grade
Designed for continuous operation in harsh industrial environments.
Conforms to industrial automation robustness norms (shock/vibration tolerant).
✔ System Integration
Full compatibility with Yokogawa CENTUM VP/VE and related DCS infrastructures.
Integrated into the system backplane for high-speed data and control signal exchange.
✔ Safety & Redundancy
Supports safety and control logic with redundant paths where configured.
Often part of safety-critical PLC subsets in plant automation.
✔ Expandability
Enables flexible system growth by adding modules to support additional I/O or functions.
6. Other Models in the Same Series
Other cards/modules that pair with or resemble V0/E1/TCAM/L08 in Yokogawa automation systems include:
CPU Boards: CP345-series, SCP451-11
I/O Modules: Digital and analog I/O cards for process signals
Power Modules: PW401. PW402 series
Communication Modules: Fieldbus/Backplane interface cards
Safety PLC Cards: Redundant safety logic processors (various FX and SCP series)
These modules together form the backbone of Yokogawa’s automation control racks.
Summary
YOKOGAWA V0/E1/TCAM/L08 is a specialized industrial automation module primarily used in large process control systems like CENTUM VP/VE.
It sits alongside CPUs, I/O, power, and communication modules to provide integrated control, data exchange, and safety logic execution in demanding industrial environments..