Separate input/output module 5466-258 Woodward

5466-258

Woodward 5466-258 Simplex 48/24 Discrete Input/Output Module for Both MicroNet and Vertex-Pro Chassis.

This unit has 1 Red Fault LED and is UL/ATEX Listed. The 5466-258 unit is part of the Vertex-Pro system for MicroNet Digital Controllers.5466-258 Technical Specifications

Air Quality    Pollution Degree 2

Control Type    Vertex-Pro Motor-Driven Compressor

Installation Overvoltage Rating    Category II

Listings    IL, ATEX, CE(EMC), DNV, ABS, and LRS

Module Type    Simplex Discrete 48/24 I/O Module

Operating Temperature Range    0-55°C

Storage Temperature    -40 to +105 °F

Weight    48 lbs. (22 kg) when in Chassis

About the 5466-258

The 5466-258 module is a Simplex Discrete Input/Output unit. The unit was produced by Woodward as part of the MicroNet Digital Control series which can also be used with a Vertex-Pro Chassis.

The typical hardware used with this unit is the MicroNet Plus hardware. This module can be used in both Simplex and Redundant systems.

This module can be used in any chassis module, whether eight or fourteen slots. Please note the locations for this unit must be non-hazardous or within Class I, Division 2. Groups A, B, C, and D.

The 5466-258 module is a forty-eight/twenty-four discrete combo module, this indicates that there are forty-eight inputs and twenty-four outputs.

There are two configurations that the module can be used in. One of them will consist of two twenty-four/twelve discrete FTMs which will connect to this module through two high-density discrete/analog cables.

The discrete inputs on this module will be optically isolated and can be accessed through the twenty-four/twelve FTMs when in the second configuration.

On the front faceplate, there is only one LED which indicates the potential faults. There are also two connectors on the module.