METSO A413150 Controller board
METSO A413150 Controller board
Valmet DNA Machine
Monitoring
Power Plants
Valmet´s Machine Monitoring
Offering in Brief
• DNA Machine Monitoring (on-line)
• Paper & board
• condition, runnability, lube oil
• Tissue
• including crepe blade chatter
• Pulp mill
• total plant, including slowly rotating machinery
• Power plants
• TG protection and analysis
• BOP analysis and possible protection
• Valmet Maintenance Pad
• as a tool for end customer
• Services
• as a cervice concept & tool for Valmet
• remote monitoring, at site analysis, IoT
• system services, sensors&cables, etc
Mechanical monitoring and protection systems
for power plant
METSO A413150 Controller board In stock
A413150
Technical Parameters
| Parameter | Specification |
| Component Type | Main Processing Board (PCBA) |
| Communication Protocol | HART (Typically 4-20 mA loop powered) |
| Input Signal | 4 – 20 mA DC |
| Supply Voltage | Loop-powered (Minimum 9.0 V DC at 20 mA) |
| Microprocessor | High-performance 16/32-bit RISC processor |
| Diagnostics | Online & Offline (Triton/ValvGuard compatible) |
| Mounting | Internal bracket within ND9100/ND9200 housing |
| Protection | Conformal coating for humidity and chemical resistance |
• Turbine Generator Vibration Protection
•Mechanical measurements, real time analysis
(100 ms cycle) and safety interlocks
• Turbine Generator Diagnostics
•Mechanical measurements with advanced analytical
calculations
•Dedicated analysis of different operating stages
(idling, shut down /run-up, steady stage)
• Condition Monitoring for auxiliary machines (BOP)
•”Less critical” machinery: pumps, fans, motors etc
DNA Machine Monitoring
Monitoring in Valmet DNA control system, key benefits in short
Common user interface for machine and process
control and condition monitoring– Lower user barrier especially for operators– Easier to use and share information between operation and
maintenance
Common history database for all control and machine
condition data– Efficient analysis and reporting– Easy comparison of different data– One source of data for Valmet IoT
One system and one engineering environment for
condition monitoring and process control– Cost efficient to build and maintain
Linking into ERP and data sharing (DNA Diary)– Only one link for all needs (operations, instrumentation, machinery)– Supports information sharing between all teams