Kollmorgen S20330-SRS S200 servo drive

S200 servo drive

Empty heading

The Kollmorgen S200 servo drive is one of the first all-digital industrial drives with a speed loop bandwidth of 800 Hz.

These compact drivers offer simplified tuning and unparalleled system throughput, featuring high-resolution feedback and high-performance current loop bandwidth for smooth movement and rapid response.

This intelligent feedback device with an electronic motor nameplate enables plug-and-play debugging in most applications.

Feature

Supports 120/240 VAC and 20-90 VDC operation, with a rated current ranging from 1.5 amperes RMS to a peak of 48 amperes RMS

24-bit high-resolution feedback

High-performance current loop bandwidth of 3-5 kHz

The intelligent feedback device with an electronic motor nameplate eliminates the need for drive parameter setting and servo circuit calibration, enabling plug-and-play debugging for most applications

The standard configuration includes a torque and speed control base, electronic gears, up to 18-bit analog reference inputs, and encoder equivalent outputs

Provide support for index or SynqNet™ based programmable motion control options

Complies with UL 508C, CE, EN50178. EN61800-C and Semi F47 standards

The independent “Sustain Life” power input enables rapid recovery in an emergency stop state

Advantages

A wide power range allows a single hard disk series to be deployed throughout the entire machine

The compact body size allows for the use of smaller cabinets or installation near the point of use

Optical isolation input/output, positive locking connector, and full fault protection ensure long service life and protection against accidental damage

High-performance system, designed to increase machine throughput

The easy-to-use graphical user interface reduces engineering and support time

Overall cost reduction

Technical data

Model

Rating data drops: 20330. 20630. 20260. 20360

Rated power supply voltage V 20… 90 volts DC 0… 264 VAC

Control logic, supply voltage V 10… 90 volts DC 85… 265 VAC

Rated output current (root mean square value, ± 3%) one 3 6 1.5 3

Peak output current (± 3%) one 9 18 4.5 9

Peak hours: 3 3 3 3 3

Maximum bandwidth of the current loop. Kilohertz 5 5 3 3

Maximum bandwidth of the speed loop. Hertz 800

Update frequency: MHz 1.25

“Size”

DC direct current and optional air conditioning

Height: 152.4 mm, 152.4 mm, 175 mm

Width: 28.7 mm, 48.3 mm, 54.8 mm

The depth without connectors is 101 mm, 101 mm, and 132 mm

The depth of the connecting parts is approximately 130 millimeters to 130 millimeters to 180 millimeters