Servo motor controller IC800SSI216RD2

IC800SSI216RD2

GE Fanuc IC800SSI216RD2-CE VersaMotion Servo Motor Controller 180-250VAC 3 Phase Input, Designed for use with specific GE Fanuc motors: MTR-3S45-H, MTR-3S46H, MTR-3S63-G, MTR-3S65-G, MTR-3S67-G, MTR-3T45-1. MTR-3T54-H, and MTR-3T55-H.

IC800SSI216RD2

About the IC800SSI216RD2

The IC800SSI216RD2 is a GE FANUC VersaMotion Servo Motor Controller.

It operates on 180-250 VAC with a 3-phase input.

Supports DeviceNet programming.

Features and Diagnostics

Includes position feedback and a serial port.

Equipped with eight discrete inputs and outputs.

The front panel displays: module status, network status, address/code, and Fwd/reverse.

A two-character LED display provides real-time diagnostic updates using mnemonic displays (e.g., “OK”, “OV” for motor overvoltage, “LE” for lost enable).

Motor Compatibility and Replacement

Designed for use with specific GE Fanuc motors: MTR-3S45-H, MTR-3S46H, MTR-3S63-G, MTR-3S65-G, MTR-3S67-G, MTR-3T45-1. MTR-3T54-H, and MTR-3T55-H.

These compatible motors offer continuous stall torque from 32 to 150.3 in-lb and rated speeds from 1.400 to 5.300 RPM.

The IC800SSI216RD2 is compatible with the IMJ-31GD-2-D Servo Motor Controller, 16A Resolver Feedback with DeviceNet (relevant for replacing older Whedco Inc. IMJ models in the S2K series).

Environmental and Installation Guidelines

Operating Temperature: 0º to 50º Celsius.

Storage and Shipping Temperatures: -40º to 80º Celsius.

Humidity: 5 to 95% non-condensing.

Heat Sink Orientation: Must be vertical.

Altitude Rating: Rated for operation up to 3.300 feet; consult GE for higher altitudes.

Installation Clearance: Requires a 3-inch clearance on all sides for effective cooling.