PC Card CIFX 50-CO – PCI

PC cards in all formats for all protocols

The cifX PC card family is the unified standard supporting all Real-Time Ethernet and Fieldbus systems for PC based automation.

The protocol stack is executed autonomously on the PC card and process data exchange with the host is done via Dual-Port-Memory or DMA (Direct Memory Access).

Thanks to the common Hilscher Platform Strategy all PC cards use the same driver and tools – independent of protocol and card format.

Thanks to the netX technology there is exactly one hardware needed for the realization of all Real-Time Ethernet protocols. A change of the communication protocol is done by just loading a different firmware.

CIFX50-C0

Always the right solution! Different cable lengths, M-12 connectors, additional NVRAM,

extended temperature range, 2-channel cards or detached network interfaces – numerous hardware options always offer the right solution for your application.

On top, a wide range of device drivers and a C-Toolkitfree of charge, are available.

The PC based automation is evolving and the Hilscher cifX PC card family keeps the pace.

With continuous expansion for new standards, protocols and formats, as M.2. mini PCIe halfsize or CC-Link IE Field, customers are always prepared for new market demands.

Product    Product Name    CIFX 50-CO

Part Number    1250.500

Brief description    PC Card cifX PCI CANopen Master or Slave

Function    Communication interface with PCI and CANopen interface

Communication controller    Type    netX 100

Integrated Memory    RAM    8 MB SDRAM

FLASH    4 MB serial Flash EPROM

System interface    Bus Type    PCI

Transmission rate    33 MHz

Data access    DPM or DMA (Direct Memory Access)

Data width    32-bit

Communication interface    Communication standard    CANopen

Interface type    ISO-11898. optically isolated

Isolation voltage    1000 V DC (tested for 1 minute)

Connector    D-Sub, male, 9-pin

Power supply    Supply voltage    +3.3 V DC ±5 %

Maximum current (typically)    650 mA (at 3.3 V)

Connector    via PCI Bus

Displays    LED display    SYS, System status LED

CAN, CANopen Status (duo LED)

Operating element    Rotary switch slot number (card ID)    To set the slot number (card ID)

Permitted ambient conditions    Operating temperature range    -20 °C … +55 °C (Air flow during measurment: 0.5 m/s)

Storage temperature range    -10 °C … +70 °C

Humidity    10 % … 95 % relative humidity, no condensation permitted

Environment    For UL compliant usage: The device must be used in a pollution degree 2 environment.

Device    Dimensions (L x W x H)    120.0 x 86 x 18.5 mm (from hardware revision 5)

Mounting/Installation    PCI slot (3.3 V)

Conformity    RoHS    Yes

Conformance with EMC directives    CE sign    Yes

Emission    EN 55011:2009 + A1:2010. CISPR 11:2009. Class A (Radio disturbance characteristics – Limits and methods of measurement)

Immunity    EN 61000-4-2:2009 (Electrostatic discharge test)

EN 61000-4-3:2006 + A1:2008 + A2:2010 (Radiated, radio-frequency, electromagnetic field test)

EN 61000-4-4:2004 + A1:2010 (Burst Electrical fast transients/burst test)

EN 61000-4-5:2006 (Surge test)

EN 61000-4-6:2009 (to conducted disturbances, induced by radio- frequency fields)

EN 61000-4-8:2010 (power frequency magnetic field test)

EN 61000-6-2:2005 + B1:2011 (for industrial environments)

UL certification    UL    The device is certified according to UL 508

UL file    UL-File-Nr. E221530

Configuration    Configuration software    SYCON. net or netX Configuration Tool