GE IS210BPPCH1AD is I/O Pack Processor Board

GE IS210BPPCH1AD is I/O Pack Processor Board

The GE IS210BPPCH1AD is not a standalone controller or field I/O interface — but rather a core I/O‑pack processor board (BPPC) designed for GE Mark VIe turbine control systems.

What is GE IS210BPPCH1AD

The IS210BPPCH1AD is  an I/O Pack Processor Board (BPPC) for the GE Mark VIe turbine‑control system.

In other words: it’s a printed circuit board (PCB) that functions as the “core” or “controller” inside an I/O‑pack module — responsible for processing signals from field I/O modules or sensors/actuators, formatting data, and communicating to higher‑level control logic / the main controller backplane.

It belongs to the BPPC family (I/O Pack Processor Card) of GE, not a standalone controller or high‑level CPU by itself, but a sub‑component inside the I/O subsystem of Mark VIe.

Technical Description & Key Features

Based on vendor documentation, here are the main technical and design characteristics of the IS210BPPCH1AD.

Basic Info

Part / Model Number: IS210BPPCH1AD (some listings also reference internal code IS215WEPAH2BA)

Type: I/O Pack Processor Board (PCB) for Mark VIe I/O packs.

Manufactured by: General Electric (GE) / GE‑Fanuc (for turbine control systems)

Hardware & Design

Construction: Double‑sided PCB with surface‑mount technology (SMT).

Mounting: The board is factory‑drilled at its corners to allow mounting (standoffs + screw mounts) onto a larger backplane or I/O pack chassis.

Ports / Interfaces: On the top side of the board — two Ethernet ports (likely for communication / data exchange within turbine control network).

Internal Components: The board carries a set of electronic components (inductors/chokes, diodes, capacitors, resistors, transistors, ICs, resistor‑networks) for power regulation, signal conditioning, and internal communication processing.

Power Supply / Electrical – as per one listing: Some vendor descriptions mention “125 V DC” as part of spec listing in one advertisement, but there is no consistent public official spec sheet confirming universal 125 V DC requirement;  this could be a mis‑listing or mis‑interpretation.

Series / Compatibility: Designed for GE Mark VIe turbine control system I/O packs.  It is explicitly stated that this board (BPPC variant) is not compatible with the later Mark VIeS system family.

I/O Pack Processor: The main role is to act as processor inside I/O pack — handling signal conditioning, data collection from field I/O (analog/digital/pulse/whatever is wired to that pack), and packaging data for communication to the main controller or higher‑level system.

Communication / Data Exchange: Through its Ethernet ports, the board enables communication over the system network (for example, in turbine control systems, communication of data/status from I/O packs to main controllers).

Support for Redundancy & System Configuration: Some listings mention that BPPC‑based I/O packs (with boards like IS210BPPCH1AD) can be used in redundant configurations (e.g., simplex or TMR / redundant I/O designs) — improving reliability for critical turbine or plant control applications.

Typical Applications & Use Cases

Given its design and role, IS210BPPCH1AD is typically used in:

Gas / Steam / Wind Turbine Control Systems: As part of the I/O infrastructure for turbine control under the Mark VIe system.  It handles input/output processing for sensors, actuators, and other I/O signals related to turbine operation.

I/O Pack Modules in Industrial Control: For other industrial automation or balance‑of‑plant control systems that use GE Mark VIe architecture — collecting and processing field signals.

Legacy System Maintenance / Spare Replacement: Because Mark VIe is older / legacy in many installations, the board is often sourced as spare part to maintain or refurbish existing turbine control racks.