emerson KL3004X1-BA1 DO 24VDC Isolated CHARM

Power Specifications

Charm Bus Power

Field Circuit Power

6.3 VDC at 32 A

24  VDC at 10 mA

Environmental Specifications

Ambient Temperature

Shock

Vibration -40°C to +70°C

10g ½ Sinewave for 11msec

1mm Peak to Peak from 2 to

13.2Hz; 0.7g from 13.2 to 150Hz

Airborne Contaminants ISA-S71.04 –1985 Airborne

Contaminants Class G3

Relative Humidity

Terminal Block Key

Position

5 to 95% Non-Condensing

5C

Note: Refer to the product label for serial number

and location and date of manufacture.

Warning: This product has specific instructions for

installation, removal and operation in hazardous

areas. Refer to document 12P5403 “DeltaV™

Electronic Marshalling Digital Automation System

(CHARM I/O Subsystem) Zone 2 Installation

Instructions”.  Other installation instructions are

available in the “DeltaV™ S-Series and CHARMs

Hardware Installation” manual.

Removal and Insertion

This unit cannot be removed or inserted with system

power energized.

Non-sparking field circuits MUST be de-energized

before removing and inserting a CHARM.

For non-sparking circuits, the fuse on a CHARM

terminal block cannot be removed when field power

is energized.

A keying system ensures compatibility between a

CHARM and the CHARM terminal block when the

CHARM is installed on the terminal block. The

terminal block keys are automatically set the first

time the CHARM is installed on the terminal block.

To install another CHARM type on a terminal block,

reset the keys by removing the terminal block and

releasing the keys from the locked position.

Maintenance and Adjustment

This unit contains no user serviceable parts and

should not be disassembled for any reason.

Calibration is not required.