The Yaskawa Σ-X series is an iterative product of the Σ-7 series

The Yaskawa Σ-X series is an iterative product of the Σ-7 series

While enhancing the athletic performance, it also better integrates the i³-Mechatronics concept, supporting the flexible application of data perception functions.

Shorten the servo adjustment time

Provide multiple adjustment methods to achieve the required performance of the equipment.

Digital data solutions starting from servo

Real-time data collection can be carried out without changing the design of machinery and equipment.

Trend prediction is made based on vibration, interference and torque command data to prevent sudden stops and malfunctions.

Safety specifications are generally applicable to control system handling. Instructions and warnings related to a specific subject or operation of the product.

The following norms must be strictly observed:

 must strictly comply with the technical specifications and typical applications of the product system

 Personnel training: Only trained personnel shall install, operate, maintain or repair the product system. must

Provide guidance and explanation of the situation in danger areas to these personnel.

 Unauthorized changes: Changes or structural changes to the product system may not be made.

 Maintenance responsibility: Must ensure that the product system is used only under appropriate conditions and in full fitness for use.

 Working environment: The user must meet the specified environmental conditions:

Safety regulation

The following safety provisions of EN 50110-1 shall be fully complied with when handling product systems (maintenance) :

1 Disconnect completely.

2 Secure to prevent reconnection.

3 Verify that the installation is complete.

4 Ground and short-circuit the device.

Warning: Only qualified maintenance personnel can remove and insert the module. In order to ensure the personal safety of the operator, before each pulling out or inserting, you must

Disconnect the power supply and ensure that there is no voltage on all terminals at the back, and the product is effectively grounded with the ground screw at the back.