HIMA HIMatrix SILworX 504111 895210001
HIMA HIMatrix SILworX 504111 (895210001) is a high-performance, compact safety controller designed for safety-critical industrial applications.
Operating within the HIMatrix F-series, this module is engineered to provide rapid response times (often $< 10$ ms) and is certified for use in environments requiring the highest safety integrity levels.
Technical Parameter Table
| Parameter | Specification |
| Model / Part Number | 504111 / 895210001 |
| Series | HIMatrix F-Series |
| Safety Integrity Level | SIL 3 (IEC 61508/11), SIL 4 (CENELEC EN 50126/128/129) |
| Performance Level | PL e (Category 4) according to EN ISO 13849-1 |
| Power Supply | 24 VDC (-15% to +20%), SELV/PELV |
| Response Time | $< 10$ ms (depending on configuration) |
| Programming Tool | SILworX (CPU OS V7+) / ELOP II Factory (Legacy) |
| Communication | SafeEthernet, Modbus TCP, PROFINET, PROFIBUS DP |
| Operating Temp | 0°C to +60°C (Standard); -25°C to +70°C (Railway variant) |
| Protection Class | IP20 |
Product Advantages and Features
Ultra-Fast Response: The L3 hardware architecture allows for multitasking and cycle times significantly faster than standard PLCs.
Intuitive Engineering: Fully compatible with the SILworX tool, allowing for drag-and-drop programming and easier validation.
Safe Communication: Uses SafeEthernet to transmit safety-related data over standard Ethernet infrastructure without compromising integrity.
Multi-Sector Certification: While widely used in Oil & Gas, it is uniquely certified for the Rail industry (CENELEC SIL 4) and Deep-Sea operations.
Hot-Swap & Online Changes: Supports program modifications and extensions while the plant is running to minimize downtime.
Application Cases
Oil & Gas: Emergency Shutdown Systems (ESD) and Fire & Gas (F&G) monitoring for offshore platforms.
Rail Systems: Signaling, level crossing protection, and interlocking systems requiring SIL 4.
Turbomachinery (TMC): High-speed overspeed protection and turbine control.
Logistics: Autonomous vehicle control and safe motion monitoring in automated warehouses.
Installation and Maintenance
| Response Time | $< 10$ ms (depending on configuration) |
| Programming Tool | SILworX (CPU OS V7+) / ELOP II Factory (Legacy) |
| Communication | SafeEthernet, Modbus TCP, PROFINET, PROFIBUS DP |
| Operating Temp | 0°C to +60°C (Standard); -25°C to +70°C (Railway variant) |
| Protection Class | IP20 |
Product Advantages and Features
Ultra-Fast Response: The L3 hardware architecture allows for multitasking and cycle times significantly faster than standard PLCs.
Intuitive Engineering: Fully compatible with the SILworX tool, allowing for drag-and-drop programming and easier validation.
Safe Communication: Uses SafeEthernet to transmit safety-related data over standard Ethernet infrastructure without compromising integrity.
Multi-Sector Certification: While widely used in Oil & Gas, it is uniquely certified for the Rail industry (CENELEC SIL 4) and Deep-Sea operations.
Hot-Swap & Online Changes: Supports program modifications and extensions while the plant is running to minimize downtime.
Application Cases
Oil & Gas: Emergency Shutdown Systems (ESD) and Fire & Gas (F&G) monitoring for offshore platforms.
Rail Systems: Signaling, level crossing protection, and interlocking systems requiring SIL 4.
Turbomachinery (TMC): High-speed overspeed protection and turbine control.
Logistics: Autonomous vehicle control and safe motion monitoring in automated warehouses.
Installation and Maintenance
Installation
Mounting: 35mm DIN rail, horizontal orientation.
Clearance: Maintain at least 100mm space above and below the module for natural convection cooling.
Grounding: Use a 2.5mm² cable for the DIN rail or housing grounding screw to minimize impedance.
Wiring: Separate signal cables from high-voltage power lines to prevent EMI interference.
Maintenance
Diagnostics: Monitor the front-facing LEDs (ERR, RUN, I/O status) for immediate fault identification.
Logging: Use the SILworX diagnostic logbook to retrieve the 700 long-term CPU diagnostic entries.
Firmware: Ensure the CPU OS and COM OS versions are compatible with your SILworX project version.
Related Models in the Series
HIMatrix F30: Mid-range controller for medium I/O counts.
HIMatrix F35: Integrated unit with 24 DI, 8 DO, and 8 AI.
HIMatrix F60: Modular system for large-scale safety applications.
HIMatrix F10: Compact PCI-based safety controller.
Unique Product Description
The 504111 (895210001) represents HIMA’s commitment to “Smart Safety.” Unlike traditional safety PLCs that act as isolated islands, this HIMatrix module acts as a networked node that combines the speed of hard-wired logic with the flexibility of a programmable system.
Its ability to handle SIL 4 railway applications and SIL 3 process applications simultaneously makes it a versatile powerhouse for any safety-instrumented system (SIS).
| H0NEYWELL | 97-4698 REV.A |
| H0NEYWELL | 51304453-100 |
| H0NEYWELL | 51304644-125 |
| H0NEYWELL | 51304672-150 |
| H0NEYWELL | 51304485-100 |
| H0NEYWELL | 05701-A-0326 |
| H0NEYWELL | 05701-A-0301 |
| H0NEYWELL | 05701-A-0329 |
| H0NEYWELL | 05701-A-0502 |
| HAAS | 3283C Rev W |
| HAAS ROTARY CONTROL | 65-4170 REV E |
Installation
Mounting: 35mm DIN rail, horizontal orientation.
Clearance: Maintain at least 100mm space above and below the module for natural convection cooling.
Grounding: Use a 2.5mm² cable for the DIN rail or housing grounding screw to minimize impedance.
Wiring: Separate signal cables from high-voltage power lines to prevent EMI interference.
Maintenance
Diagnostics: Monitor the front-facing LEDs (ERR, RUN, I/O status) for immediate fault identification.
Logging: Use the SILworX diagnostic logbook to retrieve the 700 long-term CPU diagnostic entries.
Firmware: Ensure the CPU OS and COM OS versions are compatible with your SILworX project version.
Related Models in the Series
HIMatrix F30: Mid-range controller for medium I/O counts.
HIMatrix F35: Integrated unit with 24 DI, 8 DO, and 8 AI.
HIMatrix F60: Modular system for large-scale safety applications.
HIMatrix F10: Compact PCI-based safety controller.
Unique Product Description
The 504111 (895210001) represents HIMA’s commitment to “Smart Safety.” Unlike traditional safety PLCs that act as isolated islands, this HIMatrix module acts as a networked node that combines the speed of hard-wired logic with the flexibility of a programmable system.
Its ability to handle SIL 4 railway applications and SIL 3 process applications simultaneously makes it a versatile powerhouse for any safety-instrumented system (SIS).