Woodward easYgen-1400 Manual: 37799. 37889 8440-2251

easYgen-1400 Manual: 37799. 37889  8440-2251

easYgen-1400

1 Terminals 21 to 24: Digital inputs 01 to 03. COMMON

2 Terminals 25 to 28: Generator voltage

3 Terminals 29 to 32: Mains voltage

4 Terminals 33 to 36: Generator current

5 USB type B service port for PC/laptop with ToolKit-SC

6 Terminals 1 to 14: Power Supply, Fuel/Gas, Starter, D+, Relay 01 to04. AI 01 to 04

7 Terminals 15 to 17: Magnetic Pickup

8 Terminals 18 to 20: CAN (J1939) interface

The easYgen-1400 is a control unit for engine-generator system management

applications.

The control unit can be used in simple Start/Stop applications with mains control.

Scope of delivery

The following parts are included in the covering box. Please check prior to installation that

all parts are present:

•Device easYgen genset control •

All terminal connectors that need to be screwed are delivered with plug and jack

•Clamp fastener installation material (4x)

easYgen-1400

1 Terminals 21 to 24: Digital inputs 01 to 03. COMMON

2 Terminals 25 to 28: Generator voltage

3 Terminals 29 to 32: Mains voltage

4 Terminals 33 to 36: Generator current

5 USB type B service port for PC/laptop with ToolKit-SC

6 Terminals 1 to 14: Power Supply, Fuel/Gas, Starter, D+, Relay 01 to04. AI 01 to 04

7 Terminals 15 to 17: Magnetic Pickup

8 Terminals 18 to 20: CAN (J1939) interface

The easYgen-1400 is a control unit for engine-generator system management

applications.

The control unit can be used in simple Start/Stop applications with mains control.

Scope of delivery

The following parts are included in the covering box. Please check prior to installation that

all parts are present:

•Device easYgen genset control •

All terminal connectors that need to be screwed are delivered with plug and jack

•Clamp fastener installation material (4x)

Copyright And Disclaimer

Disclaimer

All information and instructions in this manual have been provided under due

consideration of applicable guidelines and regulations, the current and known state of the

art, as well as our many years of in-house experience. Woodward assumes no liability for

any damages due to:

• Failure to comply with the instructions in this manual

• Improper use / misuse

• Willful operation by non-authorized persons

• Unauthorized conversions or non-approved technical modifications

• Use of non-approved spare parts

The originator is solely liable for the full extent for damages caused by such conduct. The

obligations agreed-upon in the delivery contract, the general terms and conditions, the

manufacturer’s delivery conditions, and the statutory regulations valid at the time the

contract was concluded, apply.

Copyright

This manual is protected by copyright. No part of this manual may be reproduced in any

form or incorporated into any information retrieval system without written permission of

Woodward GmbH.

Delivery of this manual to third parties, duplication in any form – including excerpts – as

well as exploitation and/or communication of the content, are not permitted without a

written declaration of release by Woodward GmbH

Any such unauthorized modifications

• constitute “misuse” and/or “negligence” as per the product warranty

• thereby exclude warranty coverage for any resulting damage, and

• invalidate product certifications or listings.

Our Customer Service is available for technical information. Please see page 2 for contact

details.

In addition, our employees are interested in any new information and experiences that

arise from usage and could be valuable for improving our products