FOXBORO P0926KK P0926KL Fault-tolerant control processor module
FOXBORO P0926KK is the fault-tolerant control processor module in the Foxboro FCP280 control system
It is also the core imported spare parts of the brand’s I/A series DCS.
It is widely applied in key industrial scenarios such as oil and gas, power generation, and chemical engineering, ensuring the uninterrupted operation of control systems.
The following is the detailed information
Core performance and features
Fault-tolerant design ensures continuous operation:
This module consists of two independent processor modules and needs to be installed in adjacent slots on the FCP280 baseboard.
The two modules work in coordination through high-speed communication.
Even if one of the modules malfunctions, the system can still operate continuously,
perfectly adapting to industries such as chemical engineering and power, which have extremely high requirements for production continuity.
Strong compatibility and integration: As A spare part for the I/A series DCS, it can be seamlessly integrated with FBM modules, baseboards and other equipment of the same series.
It can simultaneously adapt to multiple mainstream communication protocols such as HART and Modbus, facilitating data interaction with other industrial control devices on site.
Moreover, its modular structure makes installation and later maintenance relatively convenient.
Key technical parameters
Based on the general parameters of the same series of modules and the channel marking information, the core parameters are as follows:
Specific content of parameters
The standard working voltage is 24V DC redundant voltage
Program and data capacity: The program capacity is 6MB and the data capacity is 3MB
The memory configuration refers to the relevant modules of the same series P0926. with the mainstream being 16MB synchronous dynamic random access memory and 32MB flash memory
The maximum power consumption of the single non-fault-tolerant module is approximately 8.5 watts
It weighs approximately 1.2 kilograms
The compatible system is the Fox Polo FCP280 control system and the I/A series distributed control system